● Temperature Measurements Require No External Components
● Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
● ±2.0°C Thermometer Accuracy
● Thermometer Resolution is Configurable from 9 Bits to 12 Bits (0.5°C to 0.0625°C Resolution)
● User-Definable Thermostat Settings
● Data is Read From/Written to Through a
● 2-Wire Serial Interface
● 2.7V to 5.5V Wide Power-Supply Range
● Software Compatible with DS75 2-Wire Thermal Watchdog in Thermometer Mode
● Space-Conscious 5-Pin SOT23 Package with Low Thermal Time Constant

General Description
The DS1775 digital thermometer and thermostat provides temperature readings that indicate the device’s
temperature. Thermostat settings and temperature readings are all communicated to/from the DS1775 over
a simple 2-wire serial interface. No additional components are required; the device is truly a “temperature-to-digital”
converter.
For applications that require greater temperature resolution, the user can adjust the readout resolution from 9 to 12
bits. This is particularly useful in applications where thermal runaway conditions must be detected quickly.
The open-drain thermal alarm output, O.S., becomes active when the temperature of the device exceeds a
user-defined temperature TOS. The number of consecutive faults required to set O.S. active is configurable by the
user. The device can also be configured in the interrupt or comparator mode, to customize the method which clears
the fault condition.